? Super bright LED and good quality plastic parts.
? Light weight and easy installation.
? Each individual LED or pixel can be maintained in low cost.
? Constant current driving, uniform luminance and low power consumption.
? Pitch is 10.0mm, total pixels are 32*16, configuration of each pixel is 1R1G1B.
◆ Screen parameters
·Application environment: indoor
·Pitch: 10mm
·Pixel density: 10,000 pixels/m2
·Brightness: ≥ 800 Nits
·Contrast ratio: ≥3000:1
·Horizontal visual angle: 120 ±10
·Vertical visual angle: 120 ±10
·Working environment temperature: in or beyond the range of -20—50℃.
·Working environment humidity: in or beyond the range of 10-90％RH.
·IP grade: front IP65
·Input power frequency: 50HZ
·Cycle life: ≥100,000 hours
·Maintenance: afterwards
◆ Display module parameters
·LED specification: DIP346
·Pixel configuration: 1R1G1B
·Packaging：3528
·Size: 320mm×160mm
·Resolution: length 32 pixels, height 16 pixels
·Drive mode: constant current 1/8 scan
·Drive voltage: DC5V
·Power consumption: ≤15W
◆ System parameters
·Input signal: DVI
·Frame rate: 60HZ
·Refresh rate: ≥540HZ
·Grayscale grade: red, green and blue are 12-16bits respectively
·Brightness control: Grade 256 manual/automatic
·Display color: 549.7 billion types
·WIN/XP Operating system: WIN/XP
·Power consumption: max 352W/㎡
·Average accessible time: >10,000 hours
·Malfunction dot rate: ≤0.0001
·Working voltage: AC220V±15%
·Control distance: network cable 100m (without relay), multi-mode optical fibre 500m, single mode optical fibre 20km.
·Flatness: any adjacent pixel ≤0.5mm, modular joint distance ＜0.2mm
·Earth leakage current: ＜2mA
·Continuous working duration: ≥48 hours
